|
|
 |
Some features are optional. Features, specifications and dimensions may vary without notice. Existing machines can be different. Safety guards are removed for viewing. Never operate a machine with missing safety guards. For installation, start up and operation, see the operator’s manual supplied with the machine. |
Cutting system
 |
FEATURE |
BENEFIT |
High velocity cutting rotor
38 in. wide (965 mm)
42 knives |
- Sharp cut, prickly fiber
- Wide cutting surface and fast processing time
- Uniform, consistent cut throughout the bale
- Fewer knives than most competitors’ |
| Rotor operating on air suspension |
- Reduced load at start up
- Low energy consumption
- Efficient use of available power
- Enables single or dual-motor drive |
 |
Replaceable, bolt-on knivess |
- No sharpening
- Fast knife replacement
- Low cost wear parts |
| Variable tub speed and adjustable cutting grid |
- Length of fiber adjustable to the needs of the TMR recipe
- Easy setting |
Tub
 |
FEATURE |
BENEFIT |
| High capacity tub Inside diameter: 71 in. (1803 mm) |
- Handles round and square bales
- Holds 1 round bale or 1 large square bale |
| Loading hopper |
- Enables easy loading of large square bales, complete
or sliced (rotocut) |
| Double tub |
- Holds 2 round bales or 1 large square bale |
| Front or top loading |
- Compatible with most bale handling devices: large bale
conveyor, fork attachment, grapple, bale grabber, stabber |
| Limit switch to stop tub rotation |
- Adjustable time delay that enables stopping the front
doors in the wanted loading zone |
   |
Convenient design
 |
FEATURE |
BENEFIT |
| Compatible with bales of all sizes and dimensions |
- Only 1 machine required to cut a variety of forage:
haylage, balage, dry hay, straw, corn stalks
- Holds round bales up to 65 in. (1651 mm), square bales
84 in. (2134 mm) |
| 4-season design |
- Indoor or outdoor installation |
 |
Discharge auger 12 in. (305 mm) |
- High output
- Links directly to any TMR mixer Series MX |
| Pneumatic control with pressure gauge |
- Accurate setting of rotor pressure allows maximum motor
efficiency |
| Electromechanical control panel |
- Stand-alone control panel, fully compatible with control
panels of automated systems
- Long-lasting components
- Electrical: 200 - 600 VAC Power: 20 - 30 hp (15 - 22 kW) |
Dimensions
| MODEL |
LENGTH
po / mm
|
WIDTH
po / mm |
HEIGHT
po / mm |
WEIGHT EMPTY*
lbs / kg |
PF600 stationary
with standard tub |
92 / 2337 |
88 / 2235 |
90 / 2286 |
3500 / 1588 |
PF600 stationary with
standard tub + loading hopper |
92 / 2337 |
96 / 2438 |
102 / 2591 |
3650 / 1656 |
PF600 stationary
double tub |
92 / 2337 |
88 / 2235 |
123 / 3124 |
3800 / 1724 |
PF600 stationary
double tub + loading hopper |
92 / 2337 |
96 / 2438 |
123 / 3124 |
3950 / 1792 |
The PF600 is suitable for indoor
or outdoor installation.
Area required for installation =
12 X 12 ft. 3658 X 3658 mm
Vertical clearance =
HEIGHT + 48 in. (1219 mm) |
 |
|
|
|
|
Some features are optional. Features, specifications and dimensions may vary without notice. Existing machines can be different. Safety guards are removed for viewing. Never operate a machine with missing safety guards. For installation, start up and operation, see the operator’s manual supplied with the machine. |
Cutting system
 |
FEATURE |
BENEFIT |
High velocity cutting rotor
38 in. wide (965 mm)
42 or 84 knives |
- Sharp cut, prickly fiber
- Wide cutting surface and fast processing time
- Uniform, consistent cut throughout the bale
- Fewer knives than most competitors’ |
Rotor operating on hydraulic
suspension |
- Reduced load at start up
- Low energy consumption
- Efficient use of available power
- Driven by a tractor 40 to 120 hp |
 |
Replaceable, bolt-on knives |
- No sharpening
- Fast knife replacement
- Low cost wear parts |
| Variable tub speed and adjustable cutting grid |
- Length of fiber adjustable to the needs of the TMR recipe
- Easy setting |
Cuve
 |
FEATURE |
BENEFIT |
High capacity tub Inside diameter:
71 in. (1803 mm) |
- Handles round and square bales
- Holds 1 round bale or 1 large square bale |
| Loading hopper |
- Enables easy loading of large square bales, complete
or sliced (rotocut) |
| Front or top loading |
- Compatible with most bale handling devices:
fork attachment, grapple, bale grabber, stabber |
| Robust tub bearings |
- Bale can be loaded without stopping the tractor provided
the rotor is lowered fully |
Convenient design
 |
FEATURE |
BENEFIT |
| Compatible with bales of all sizes and dimensions |
- Only 1 machine required to cut a variety of forage:
haylage, balage, dry hay, straw, corn stalks
- Holds round bales up to 65 in. (1651 mm), square bales
up to 84 in. (2134 mm) |
| 4-season designs |
- Indoor and outdoor operation
- Cuts frozen haylage bales |
 |
Heavy duty belt drive |
- Reliable, low-maintenance mechanism transmitting power
to rotor, discharge auger and blower |
| Rotor suspension and tub velocity controlled by hydraulics |
- Simple operation
- Low maintenance
- Durability |
| Discharge auger 12 in. (305 mm) |
- High output
- Discharge on belt conveyor or using a blower |
| Inspection doors |
- Easy access to rotor and drive mechanism |
Dimensions
| MODEL |
LENGTH
po / mm |
WIDTH
po / mm |
HEIGHT
po / mm |
WEIGHT EMPTY*
lbs / kg |
PF600 PTO
with standard tub |
156 / 3962 |
103 / 2616 |
102 / 2591 |
4500 / 2041 |
PF600 PTO with standard tub
and loading hopper |
156 / 3962 |
103 / 2616 |
114 / 2896 |
4650 / 2109 |
|
|
